QUARTZ MAINTENANCE
Quartz is one of the hardest known minerals and when combined with very small amounts of polyester resins to bind it, the resins add color, make it non porous, (thus never requiring a sealer) and stain and scratch resistant.
CLEANING QUARTZ COUNTERTOPS
ROUTINE CLEANING
Though quartz will resist permanent staining when exposed to liquids like wine, vinegar, tea, soda, etc, it’s important to wipe up spills immediately. Take care of fresh messes with mild dishwashing detergent and a soft cloth.
For dried stains, your best bet is a glass or surface cleaner, a nonabrasive sponge and a little elbow grease. Keep a plastic knife handy to gently scrape off gum, food, nail polish, paint, or other messes that harden.
SPOT CLEANING
Removing grease by using a degreasing product. Kitchen degreasers loosen and remove the grease from the quartz countertop surface. Follow the degreaser manufacturer’s instructions for use.
Marker stains can be removed by moistening a cloth with Goo Gone or a comparable product and rubbing it into the stain. Rinse thoroughly with warm water to remove any cleanser residue.
DEEP CLEANING
For best results, spray a generous amount of a nonabrasive surface cleaner over your countertop and let it sit for 10 minutes. Wipe away with a non-scratch sponge.
If a chip does occur and you find the piece that chipped out, hold on to it. Most of the time it can be epoxied back into place. Do not stand, kneel down on, or sit on your countertops, as they could crack or break.
CHECK OUT OUR
QUARTZ COLLECTIONS
AVOID
SLICING & CUTTING
Quartz is a hard surface, but not hard enough to withstand a knives cutting. So, slice and dice to your heart’s content, but make sure it’s on a cutting board to avoid ugly scratches.
HARSH CHEMICALS
Nitrogen-containing compounds, such as ammonia, can damage your cabinets finish. Avoid using detergents, strong soaps, or abrasive cleaners and pads, as they may be harmful to the finish.
EXCESSIVE HEAT
Though quartz is heat resistant, the resin used in manufacturing can melt in heat above 300°F. A sudden change in temperature or prolonged exposure to heat may cause cracking. Always use a trivet or hot pad.